Security Systems
Grasbrunn
30-July-2012
Page 10 of 11
Configuring an I-Frame Quality value of 4 for XFM4 encoder modules was
set incorrectly as 0 on the device. This has been corrected.
Displaying Image panes in Operator Client for DiBos and BRS has been stabilized.
Encoder and decoder connections used to require having the same password on both devices.
This has been resolved to work now as well with different passwords.
Image quality of exports in ASF format has been improved for both HD and SD cameras.
In large systems it could take up to one minute until a device is shown as disconnected in case of
network disconnect. This has been improved to take usually less than 15 seconds.
In rare situations, sequences with Bosch Recording Station cameras would run into displaying
issues. This has been resolved.
In rare situations, the connection status of an encoder or an IP camera would not be updated
correctly after the device was without power.
In some situations, changes to Special Days for recording settings would not be updated on
encoders and cameras recording with VRM.
IntuiKey keyboard sometimes did not offer PTZ control instantly when selecting a PTZ camera.
This has been resolved.
Performance for Operator Client logon screen to initially appear has been improved.
Playback for VRM has been stabilized for non-responsive iSCSI targets and has been improved
to allow frequent forward and backward playback operations.
PTZ locking can now lock multiple PTZ cameras at the same time.
When replacing an MPEG-4 device with an H.264 device under the same IP address, now
MPEG-4 and H.264 recordings can be played back in the same timeline.
When a decoder connection has been lost, in some rare cases the video image was not restored
on the monitor automatically. This has been resolved.
When configuring IP cameras of the ARM device family, Configuration Client now correctly
reflects that one BP+ stream is possible.
When jumping to the newest and oldest recording, the Image pane is refreshed now reliably.
When scanning VRMs in Config Client, response time has been significantly improved. VRM
cannot be scanned in multicast.
Known issues in version 3.0
A snapshot or print-out of a DiBos or Bosch Recording Station live image has the record date of
Jan 1, 2000.
Cameras configured in sequences are shown on Analog Monitors independently of the user
permissions for this camera.
Find Video By Event will not display possible results if detailed filtering criteria is used. Best
search by defining a time span only.
Frequent network losses between Central Server and DiBos or Bosch Recording Station may
result in alarms from DiBos or Bosch Recording Station no longer being transmitted.
In large configurations with 2000 cameras, saving the configuration in relationship with detailed
permission settings can take up to 10 seconds in some situations.
In order to verify the authenticity of video data, an Operator must specify a start and end time.
Verify Authenticity checks against manipulation of video data. Verify Authenticity is not supported
for Alarm Image panes.
In some rare occasions, Operator Clients have to be started manually after No-Touch-
Deployment.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern