Barco Coronis 3MP Bedienungsanleitung PDF herunterladen (Seite 50)

BarcoMed control panel settings Single Source Master

results in increased performance since the frame buffer is set to

run with 8-bit pixels. While this option may be used with

applications that normally require 10-bit support, there will be a

loss of pixel depth, i.e. 256 shades of gray instead of 1024

simultaneous shades of gray.

Disable RGB To Static Gray Color Translation

Select Disable RGB To Static Gray Color Translation if you wish to

have RGB values equally weighted, with 1/3 each. When not

selected, then the International Commission on Illumination (CIE

– Commission Internationale de I’Eclairage) model will be

adapted, which weights the colors as 59% Green, 30% Red, 11%

Blue.

Monitor Configuration

If the options in this section are grayed out, then they are not

available for the model controller with which you are working.

Graphics Board

There is one option in this section, the Update Firmware button.

Clicking this button will launch the BarcoMed Hardware

Configuration utility. This program allows the user to flash

update the firmware stored in the ROM of the currently selected

BarcoMed display controller. The BarcoMed Hardware

Configuration utility is implemented in a Wizard format, which

guides the user through the flash update procedure. The user will

be prompted to select a firmware update file to use for the

update process. This file will be provided by Barco Medical

Imaging if and when a firmware update is required.

Device details

The Device Details page provides detailed information about the

display controller connected to the active display. This

information is useful in debugging issues that may occur when

using your Barco Medical Imaging Display System.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 79 80

Keine Kommentare

Barco Coronis 3MP Bedienungsanleitung Seite 50