Barco Coronis 3MP Bedienungsanleitung PDF herunterladen (Seite 45)

BarcoMed control panel settings

This chapter describes how to configure the displays in your

Barco Medical Imaging Display System using the tools available

through the Advanced button on the Settings tab of the Windows

Display Control Panel.

Accessing the Barco tab

Note: You must have logged on to Windows using an account

with administrator privileges in order to use the Barco portions of

the “Windows Display Control Panel” to change any display

settings.

1. Open the “Windows Display Control Panel” by one of the two

methods below:

a) Start > Settings > Control Panel > Display

b) Open the “Display Properties Control Panel” by right

clicking in an empty area on the desktop, then select

“Properties”.

2. Click on the “Settings” tab.

3. Select the “rectangle” that represents the Barco display

whose settings you wish to change.

4. Click on the “Advanced” button.

5. Select the “Barco” tab from the Properties screen.

Using the Barco tab

The Barco tab is divided into three sections. The first section

provides information about the graphics controller and allows

access to the graphics controller advanced configuration pages.

The second section provides information about the display. The

bottom section allows access to two Barco tools, Barco System

Report and Barco’s softcopy QA solution, MediCal QAWeb,

MediCal Pro or Niowatch, depending on which solution is

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

Keine Kommentare

Barco Coronis 3MP Bedienungsanleitung Seite 45