Barco CTPN-41B Bedienungsanleitung PDF herunterladen (Seite 19)

english

4.6.1 Inserting a lens

1. Remove the protection lid on the projector by turning the lid anti-clockwise until it

comes loose

2. Remove the protection lids from the lens

3. Insert the lens, making sure the red line marking on the lens points straight up towards

the top of the cabinet. If the lens does not enter on the ﬁrst attempt, retract the lens and

try again from a slightly different angle. Do not use force!

4. When the lens enters all the away in, ﬁrmly twist the lens clockwise until it clicks into

position

4.6.2 Changing/removing a lens

1. Press in the lens release button

2. Twist the lens ﬁrmly anti-clockwise until it can be pulled gently out

3. Remove the existing lens and put the 2 lens projection caps back on the removed lens

4. Replace with another lens, or if no lens is to be installed, remount the projector protec-

tion lid

Note that the lens positioning when using lens shift may affect the accessibility of the

lens button. If so, reposition the lens to gain access.

4.6.3 Lens range

The table shows a selection of lenses available. Please see www.barco.com for more

information about lens availability.

ITEM TYPE THROW RATIO

(WQXGA)

F# f (mm) RANGE

(m)

SHIFT

EN51 Zoom 1.71-2.37:1 2.60-3.09 33.9-46.5 1.5-10 Ver: 110%

Hor: 80%

EN52 Fixed 0.99:1 2.60 19.7 1.0-10 Ver: 100%

Hor: 70%

EN53 Fixed 0.79:[email protected] m 2.60 15.8 0.8-3.3 Ver: 65%

Hor: 55%

EN54 Zoom 2.68-4.18:1 2.60-3.26 52.6-81.5 5-25 Ver: 110%

Hor: 80%

EN55 Zoom 0.86-1.16:1 2.50-2.72 17.2-23.1 0.8-5.0 Ver: 105%

Hor: 75%

EN56 Zoom 1.14-1.74:1 2.50-2.72 22.8-34.7 1.3-7.0 Ver: 105%

Hor: 75%

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Keine Kommentare

Barco CTPN-41B Bedienungsanleitung Seite 19