Barco Coronis Fusion Betriebsanweisung PDF herunterladen (Seite 47)

Coronis Fusion 6MP 47

TO MANUALLY SELECT A VIDEO ENCODING MODE:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > Image Sources > (Left/Right)

Image Source menu.

3 Enter the Video Encoding submenu.

4 Select one of the available video encoding modes and confirm.

Grayscale conversion modes

ABOUT GRAYSCALE CONVERSION MODES

Grayscale conversion modes specify how color generated on the display

controller is converted to grayscale in your display.

The available grayscale conversion modes are:

Dual 10 Dual 10 is a Barco specific 10-bit video

encoding mode which is usually used on

grayscale displays and which allows full

refresh rate.

Automatic When selecting this option, your CORONIS

USION 6MP display will automatically

assign the correct video encoding settings

to the connected video input signals.

Your CORONIS FUSION 6MP display automatically detects the

connected video input signals and applies the correct grayscale

conversion settings. Manually selecting a grayscale conversion

mode is possible, but then your display’s image source

selection mode should be set to allow this. Please refer to

“Image source selection modes” on page 43 to do this.

Use Red Channel This mode is intended for grayscale

displays where gray is sent over the red

channel.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 83 84

Keine Kommentare

Barco Coronis Fusion Betriebsanweisung Seite 47