Barco Coronis Elite Spezifikationen PDF herunterladen (Seite 35)

Single-head installation

To attach the panel unit to the display stand:

1. Take the display stand from the packaging and put it on a solid flat

surface.

2. Take the panel unit from the packaging and hold it in portrait

position. The I-Guard should be positioned bottom right.

3. Hook the top gaps in the rear of the panel (1) over the top anchors

of the stand attachment plate (2). see figure 12.

4. Push the bottom of the panel firmly towards the stand so that the

bottom anchors (3) clip in the bottom gaps (4).

5. Check that the panel is firmly attached to the stand.

Figure 12: Attaching the panel to the display stand

To detach the panel unit from the display stand:

1. Firmly push the push-button at the rear of the panel (5) or (6).

Push button (5) to release the panel in landscape position. Push

button (6) to release the panel in portrait position.

2. Pull the bottom of the panel towards you and at the same time lift

the panel from the stand attachment plate.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 74 75

Keine Kommentare

Barco Coronis Elite Spezifikationen Seite 35